True expertise never lies in mere theoretical discussion; rather, it is forged on the production floor by a group of dedicated problem-solvers. Though they bear no flashy titles, they have honed their exceptional skills through relentless, day-to-day practical experience. When confronted with complex equipment issues, they employ a thorough diagnostic approach—observing, listening, questioning, and analyzing—to identify the root cause with precision; when faced with production bottlenecks, they dare to take initiative and experiment, breaking through cross-functional barriers; and when encountering sudden risks or emergencies, they step forward promptly to safeguard the safety of the entire facility.

      Skill is never innate; it is honed through relentless, hands-on effort time and again. Today, let us take a closer look at three frontline workers and experience the wisdom, courage, and sense of responsibility they embody.

Ye Lin: The Forklift Driver's "Emergency Moment"

Rare Earth Resources Comprehensive Utilization Sector – Ganzhou Huazhuo – Forklift Driver

      At Ganzhou Huazhuo, Ye Lin is a forklift operator in the Pretreatment Team of the Production Technology Department; he is also a long-serving employee who has been working side by side with the company since the early stages of the project's development.

      Since joining the company in May 2022, he has diligently and thoroughly executed every fundamental task—whether it involved raw material handling, material organization, or on-site support. Always keeping safety at the forefront, he strictly adheres to operational protocols and follows standardized procedures; since joining the company, he has maintained a record of zero safety violations and zero safety incidents, safeguarding the workshop's safety perimeter with unwavering rigor.

      While operating a forklift is his primary job, in times of crisis he steps forward as a frontline responder. During one material unloading operation, the raw materials suddenly caught fire – a dangerous situation that arose out of nowhere. At this critical moment, Ye Lin did not panic or retreat; instead, he immediately detected the fire, swiftly assessed the risks on-site, and without hesitation rushed forward to initiate emergency response measures. With proficiency, he operated firefighting equipment to extinguish the blaze while simultaneously cordoning off the hazardous area and evacuating surrounding materials. The entire response procedure was executed with calmness and professionalism, effectively containing the spread of the fire and safeguarding the company's assets to the greatest extent possible.

      He demonstrated unwavering dedication in his daily duties and stepped forward with courage during critical moments. His exceptional operational skills and remarkable bravery earned him widespread recognition. In September 2023, he competed in the Jiangxi Province "Tiangong Cup" Labor and Skills Competition, where he won the third prize in the forklift operation category. In June 2026, thanks to his outstanding practical performance, he was recommended by the company as a candidate for the Ganzhou City Model Worker title.

      No job is too small – dedication always shines brightly. An ordinary forklift driver's actions tell us that even the most mundane role can unleash extraordinary power.

Yang Yongwei: From a sintering expert to a breakthrough innovator across industries

Zhejiang Zhonghang – General Process Section Supervisor (Rare Earth Magnetic Materials Sector)

      There is a form of growth known as growing alongside a company. Yang Yongwei has been dedicated to the front-line production of NdFeB magnetic materials for over a decade; starting as an ordinary operator, he has steadily risen to become a fully capable and independent section supervisor.

      During the company's early days, Yang Yongwei joined the sintering team, marking the beginning of his lifelong dedication to sintering technology. He spent extensive time at the production site, thoroughly familiarizing himself with the equipment's operational logic and meticulously studying the process parameters; he internalized every detail of equipment operation and quality assessment, becoming a widely recognized expert in sintering technology throughout the entire workshop.

      In 2014, aligning with the company's strategic development roadmap, he joined the newly established Zhejiang Zhonghang. At the time, the new plant was in its infancy—its production processes were still maturing, and there was a severe shortage of technical personnel. With this significant responsibility resting upon him, he was exceptionally promoted to Head of the Sintering Department. Facing a production line that required extensive overhaul, he streamlined the workflows and established robust operational standards. Within just six months, he enabled the sintering department to achieve stable, high-efficiency mass production, laying a solid foundation for the new plant's successful commissioning.

      Challenges never cease. At that time, the shaping section had long been plagued by defective products—defects such as missing corners or bulging edges occurred frequently, directly hindering order delivery. Recognizing that each production step was interdependent and that sintering and shaping were inextricably linked, Yang Yongwei took the initiative to confront these challenges and step into this "daunting task" from a different field.

      Over the course of half a month, he spent time at the profile-forming workstation, starting from scratch with hands-on practice, meticulously recording production data, repeatedly fine-tuning parameters, and undergoing countless trials and improvements – ultimately overcoming the longstanding challenges associated with the profile-forming process, leading to a qualitative leap in the quality of the raw material shaping.

      Through over a decade of relentless honing and accumulation, he has developed an exceptional ability to "diagnose faults by listening to sounds and identify issues by observing conditions." This remarkable diagnostic acumen cannot be achieved through any shortcut—it stems entirely from countless days and nights spent immersing himself on-site, engaging in deep study and continuous learning. The courage to delve deeply, to break through boundaries, and to tackle challenging problems—this is the tenacity of frontline professionals.

Zhang Hang: In the workshop, turning textbooks into real skills.

Renewable Resources Equipment Sector – Huahong Technology – Final Assembly and Commissioning Worker

      While many graduates yearn for glamorous office careers, Zhang Hang chose to dedicate eight years of his youth to the bustling front lines of production.

      As a key member of the final assembly and commissioning team with an undergraduate degree, he faced the complex and demanding nature of the fieldwork without hesitation, dedicating himself fully to the equipment commissioning process. Whether it involved the complete assembly and testing of the entire machine or the repeated verification of parameters, he never overlooked any detail. He closely monitored the equipment's operational status, identified potential hazards, and rigorously ensured the quality of all equipment before it was shipped from the factory.

      Hydraulic and electrical systems are the two core components of equipment—and also the two most challenging areas to master. Zhang Hang is a diligent and inquisitive engineer who meticulously studies technical drawings and technical manuals to gain a thorough understanding of hydraulic circuit architectures and electrical control logic. When faced with complex malfunctions, he does not shy away but proactively tackles them, accumulating valuable hands-on experience through repeated problem-solving efforts. When dealing with various anomalies in complex equipment, he is always able to quickly identify the root cause and efficiently complete debugging and optimization tasks. As a rare, dual-skill professional proficient in both hydraulic and electrical systems within his team, he has repeatedly helped the team overcome technical challenges and enhance production efficiency.

      Excellent technical expertise paired with genuine warmth – Zhang Hang embodies this approach in his work. He is approachable and friendly, always sharing his knowledge generously with new colleagues and patiently teaching them practical debugging techniques; when his team encounters challenging or complex tasks, he takes the initiative to shoulder additional responsibilities, motivating his teammates to grow together. Moving beyond textbook theory and grounding himself in real-world field operations – after eight years of dedication and relentless pursuit, Zhang Hang uses his passion and dedication to exemplify the ideal image of an industrial worker in the new era.

      Skill is built through hard work; breakthroughs are achieved through daring initiative. Ye Lin stepped up during a crisis, safeguarding safety from his humble post; Yang Yongwei embraced bold experimentation, tackling cross-functional challenges to resolve production bottlenecks; Zhang Hang devoted himself to in-depth research, honing his versatile skills through hands-on experience on the front lines.

      They represent the collective spirit of countless frontline workers. There are no overnight masters—only professionals honed through relentless practice. Behind every fault diagnosis, every round of process optimization, and every emergency response lies sweat, perseverance, and an unwavering determination to never give up.

Every step forward taken by the company is made possible by a team of dedicated individuals—those who embrace responsibility, excel at deepening their expertise, and possess the ability to break through challenges. We extend our heartfelt tribute to every frontline worker who stands firmly at the scene and tackles difficulties head-on.